Installing The Ball Coupling - Mercedes-Benz 2015 M-Class Operator's Manual

Towing a trailer
258
i This also applies if you have activated
cruise control or DISTRONIC PLUS.
This will use the braking effect of the engine,
so that less braking will be required to main-
tain the speed. This relieves the load on the
brake system and prevents the brakes from
overheating and wearing too quickly. If you
need additional braking, depress the brake
pedal repeatedly rather than continuously.
Driving tips
If the trailer swings from side to side:
Do not accelerate.
X
Do not counter-steer.
X
Brake if necessary.
X
Maintain a greater distance from the vehi-
R
cle in front than when driving without a
trailer.
Avoid braking abruptly. If possible, brake
R
gently at first to allow the trailer to run on.
Then, increase the braking force rapidly.
The values given for gradient-climbing
R
capabilities from a standstill refer to sea
level. When driving in mountainous areas,
note that the power output of the engine
and, consequently, the vehicle's gradient-
climbing capability, decreases with
increasing altitude.

Installing the ball coupling

G WARNING
If the ball coupling is not correctly installed
and secured, it can come loose during the
journey and endanger other road users. There
is a risk of an accident and injury.
Always install and secure the ball coupling as
described. Before every journey, ensure that
the ball coupling is secured with the bolt and
the corresponding spring cotter.
G WARNING
If the ball coupling is not installed correctly or
not secured with the bolt provided and the
corresponding spring cotter, the trailer may
come loose. There is a risk of an accident.
Always install and secure the ball coupling as
described. Before every journey, ensure that
the ball coupling is secured with the bolt and
the corresponding spring cotter.
G WARNING
If the ball coupling is not installed and secured
correctly the trailer may come loose. There is
a risk of an accident.
Install and secure the ball coupling as descri-
bed in the ball coupling installation instruc-
tions. Make sure that the ball coupling is
installed and secured correctly before every
journey.
Cover cap
Pull protective cap : in the direction of the
X
arrow, out of the ball coupling recess.
Place protective cap : in the ball coupling
X
recess.