Semi-Automatic Cooking - DèLonghi DE60PYROS Installation And Service Instructions Use And Care Instructions

Pyrolytic oven
Table of Contents

Advertisement

SEMI-AUTOMATIC COOKING

Start immediate cooking or switch the oven off automatically after
the programmed cooking time.
1
1
1
2
3
3
3
4
4
4
Setting
1.
2.
3.
4.
5.
During cooking
5
6
6.
At the end of cooking
7.
8.
9.
10.
11.
Note: At the end of the programme always turn the
function selector knob to 0 (oven OFF).
Set the cooking function by turning the oven
selector to the function required.
The cooking temperature appears on the display.
To change it proceed as described in the Setting
the cooking chapter
Press pushbutton 2.
0.00
appears.
Press pushbuttons 5 or 6 to set the cooking time
(cooking time in hours and minutes: set it to ten
minutes less than the time required because the
stored heat will complete the cooking).
AUTO
On the display
cooking programme starts.
During the cooking cycle, the display shows the
oven temperature measured by the probe.
Press key 2 to display the time remaining until the
end of cooking.
The cooking time and temperature can be varied
at any time, as described above.
End
appears on the display,
the audible signal sounds.
The cooking cycle has finished and the oven is
OFF.
Press any programmer pushbutton to stop the
audible signal.
OFF
appears (oven OFF).
Turn the function selector to
The programmer display shows the time.
AUTO
starts to flash and
becomes steady and the
AUTO
flashes and
0
(oven OFF).
29

Advertisement

Table of Contents
loading

Table of Contents