DèLonghi DE60PYROS Installation And Service Instructions Use And Care Instructions page 22

PROGRAMMER
MESSAGE
variable
I I
MESSAGE MEANING
Cooking time set or oven temper-
ature measured by the internal
sensor.
A temperature below 50°C has been
set. The oven has switched off.
The audible signal has switched
off after the end of cooking (End).
dEF = defrost
The "defrosting frozen food" func-
tion has been set.
End with AUTO flashing and
audible signal.
End of the programmed cooking.
00.00 with bell symbol flashing
and audible signal. End of the
timer countdown.
Start of the Pyrolysis cycle.
P0.00 with P flashing.
This appears after do.Lo,
because the function selector
knob has been moved from the
Pyrolysis function to a cooking
function. The temperature has
dropped below 300°C. The key
LED goes out and the door
unlocks.
P0.00 with P flashing. The oven
selector knob has been moved
to the Pyrolysis function (P).
AUTO flashing. End of the pyrol-
ysis cycle. This message remains
until the door unlocks.
WHAT TO DO
To change the cooking tempera-
ture press key 4 of the program-
mer, then keys 5 or 6.
Press key 4 of the programmer,
then keys 5 or 6.
Turn the function selector knob to
0 The time will appear.
To turn the oven off turn the func-
tion selector knob to 0.
Press any programmer key to
silence the audible signal OFF
appears (see specific note).
Press any programmer key to
silence the audible signal. The
time appears.
To increase the cycle length, up to
max 3 hours, press key 2 of the
programmer then key 6. To reduce
to the minimum 1 hour 30 minutes
press key 2 of the programmer
and then key 5.
Turn the oven selector knob to 0
and repeat the operations to start
the Pyrolysis cycle.
To start the Pyrolysis cycle press
key 3 of the programmer.
To cancel the operation turn the
oven function selector knob to 0.
Wait for the door to unlock.