DèLonghi DE60PYROS Installation And Service Instructions Use And Care Instructions page 25

HOW TO STOP THE PYROLYSIS CYCLE
➀
➁
I I
1.
Turn the function selector to
-
If the oven cavity temperature is higher than
300 °C
do•Lo
1a.
grammer display.
1b. When the oven cavity temperature drops below 300°C:
- the time appears on the programmer display again
- the key pilot light goes out
- the door unlocks
-
If the oven cavity temperature is lower than 300 °C
1c. The time appears on the programmer display
1a
1d. After a technical time:
- the key pilot light goes out
- the door unlocks
1b
ACCIDENTAL INTERRUPTION OF THE PYROLYSIS
CYCLE
2.
The function selector has been turned to any
cooking function
-
If the oven cavity temperature is higher than 300 °C
do•Lo
2a.
grammer display.
2b. When the oven cavity temperature drops below 300°C:
P0•00
-
- the key pilot light goes out
- the door unlocks
3c. To reset normal conditions turn the function selector
0
to (oven OFF). The time appears on the program-
2a
mer display.
-
If the oven cavity temperature is lower than 300 °C
2b
3d. The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the
heating elements are working).
3e. After a technical time:
- the key pilot light goes out
3d
- the door unlocks
3f. To reset normal conditions turn the function selector
0
to (oven OFF). The time appears on the program-
3d
mer display.
(door locked) appears steadily on the pro-
(door locked) appears steadily on the pro-
P
appears with
0
(oven OFF)
flashing
21