Energy Management; Removing The Dishes - Smeg DWAFI4510 Instruction Manual

User instructions

ENERGY MANAGEMENT

After 5 minutes of inactivity (wash cycle completed, stopped or set but
not started), the dishwasher switches to standby mode to reduce energy
consumption.
In this mode, the dishwasher indicator panel (lights or display depending
on model) functions more slowly (switch-on once every 5 seconds).

REMOVING THE DISHES

At the end of the wash program, wait at least 20 minutes before
removing the dishes, to allow them to cool. To ensure that any drops of
water left in the top basket do not drip onto the dishes still in the bottom
basket, you are advised always to empty the bottom basket first.
13