Adjusting The Rinse Aid Dispenser Setting; Adding Detergent - Smeg DWAFI4510 Instruction Manual

User instructions

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. It is possible
to change this setting by turning the dispenser selector to the required
position: the amount of rinse aid dispensed depends on the selector
position.
•
To adjust the rinse aid setting, rotate the dispenser cap a quarter of
a turn anticlockwise and remove it.
•
Then rotate the rinse aid selector to the desired position.
•
Replace the cap, turning it clockwise.
•
The amount of rinse aid must be increased if the washed dishes
appear dull or have circular stains.
•
If, on the other hand, the dishes are sticky or have white streaks, it
is necessary to reduce the rinse aid dosage.

ADDING DETERGENT

To open the detergent dispenser cap, lightly press
the button P. Add the detergent and close the cap
carefully.
During the wash cycle, the dispenser will open
automatically.
15