User Instructions; Description Of The Controls; Upper Panel; Switching On, Setting The Washing Program And Starting The Program - Smeg DWAFI4510 Instruction Manual

User instructions

3. Description of the controls

3.1

Upper panel

All the dishwasher controls are grouped on the upper panel. Switching on,
programming, switching off, etc. are only possible when the door is open.
The panel shown is given as example: the form of the lights and buttons
may vary depending on the model.
ON/OFF BUTTON
1
Press this button to switch the dishwasher on/off.
SELECTED PROGRAM INDICATOR LIGHTS
This light indicates the program selected and the occurrence of a
2
fault
(Troubleshooting).
PROGRAM SELECTION BUTTON
+ ADJUSTING THE WATER SOFTENING SYSTEM
3
Used to select the wash program required and adjust the water
softening system.
RINSE AID WARNING LIGHT
4
This light indicates the rinse aid is finished.
SWITCHING ON, SETTING THE WASHING PROGRAM AND
STARTING THE PROGRAM
•
Press the ON/OFF button (1); the PROGRAM INDICATOR LIGHT
(2) will come on;
•
Keep pressing the PROGRAM SELECTION button (3) until the
indicator light for the required program lights up;
•
Select the required option (if any, depending on models);
•
Close the door and after about 2" the program will start; while it is
running, the corresponding LIGHT will flash (program running
indicator).
9