Wash Programs; Cancelling A Program In Progress; Changing The Program - Smeg DWAFI4510 Instruction Manual

User instructions

3.2 Wash programs

Before starting a wash program check that:
•
The water supply tap is open.
•
The softener container contains regenerating salt.
•
The correct amount of detergent has been added to
the dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.

CANCELLING A PROGRAM IN PROGRESS

•
Open the door, taking care to avoid splashes of water, and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the
simultaneously (marked "end").
•
Close the door.
•
After approximately 1 minute the dishwasher will advance to the end
of cycle.

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
indicator lights for programs 4 and 5 illuminate
11