Painted Surfaces; Glass Surfaces - GE JGRC14 Use And Care Manual

The light bulb is located in the upper right corner
of the oven. Before replacing the bulb, disconnect
electrical power to the oven at the main
breaker panel. Let the bulb cool completely before
removing it. Replace the bulb with a 40 watt
appliance bulb only. Do not touch a hot bulb with a
damp cloth because the bulb will break.
Oven Shelves
The oven shelves may be cleaned with a mild
abrasive cleanser or steel wool. After cleaning,
rinse the shelves with clean water and dry with a
clean cloth.
Control Panel
It's a good idea to wipe the control panel after each
use of the oven. Clean with mild soap and water or
vinegar and water, rinse with clean water and polish
dry with a soft cloth.

Painted Surfaces

Painted surfaces include the outside oven door, control
panel and drawer front. Clean these with soap and
water or a vinegar and water solution. Do not use
commercial oven cleaners, cleansing powders, steel
wool or harsh abrasives on any painted surface.

Glass Surfaces

To clean the outside glass finish, use a glass cleaner.
Rinse and polish with a dry cloth. Do not allow the
water or cleaner to run down inside the openings in
the glass while cleaning.
fuse or circuit
(continued next page)
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleansers
on the control panel—they will damage the finish.
A 50/50 solution of vinegar and hot water works well.
21