Minor Adjustments; Broil And Oven Burner - GE JGRC14 Use And Care Manual

MINOR ADJUSTMENTS YOU CAN MAKE
Broil and Oven Burner Air Adjustment Shutters
Air adjustment shutters for the burner regulate the
flow of air to the flames.
To adjust the air shutter, remove the oven bottom
(see the Care and Cleaning section). Turn the burner
full on and check the flames. The burner flames
should not flutter or blow away from the burner. They
should be blue in color with no trace of yellow.
Foreign particles in the gas line may cause an orange
flame at first, but this will soon disappear. If the
flames are yellow or flutter, open the air shutter more.
If they blow away from the burner, close the air
shutter more.
If necessary, use a screwdriver to loosen the air
shutter screw. Then adjust the air shutter and, when
the flames are right, retighten the air shutter screw.
24
To adjust the orifice hoods, check the inner cone of
the flame.
WARNING: If you attempt to measure the
inner cone of the flame, please use caution.
Burns could result.
,
The inner cone of the flames should be about
1/2" long. If the flames are not right, use a 1/2" open-
end wrench or adjustable joint pliers to adjust the
orifice hood.
To shorten the cones, tighten the orifice hood by
turning in the "LP" direction. To lengthen the cones,
loosen the orifice hood by turning in the "Nat."
direction.