Locating The Spare Retainer Bracket; Installing A Retainer Bracket - Lenovo ThinkCentre 7061 Hardware Installation And Replacement Manual

2. Remove the front bezel. See "Removing and replacing the front bezel" on
page 12.
Note: Notice the spare retainer bracket 1 attached to the side of the upper
drive cage.
Figure 12. Locating the spare retainer bracket
3. Remove the metal static shield from the drive bay using your fingers to pull it
outward.
4. If you are installing a drive with accessible media, such as an optical drive,
remove the plastic panel in the bezel for bay 2 by squeezing the plastic tabs
that secure the panel on the inside of the bezel.
5. Remove the retainer bracket from the upper drive cage by sliding it
downward.
6. For a 5.25-inch drive, install a retainer bracket on the side of the drive.
Figure 13. Installing a retainer bracket
7. For a 3.5-inch drive, you must use a Universal Adapter Bracket, 5.25 to
3.5-inch. You can obtain a Universal Adapter Bracket, 5.25 to 3.5-inch from a
local computer retailer or by contacting the Customer Support Center. Install a
retainer bracket on the side of the Universal adapter bracket.
Chapter 3. Installing options and replacing hardware
19