NetComm Mega-i-Modem 56 Quick Start Manual page 4

3. Click "Next" to start the installation.
4. Click "Finish" to end this installation
procedure.
5. The "Add New Hardware Wizard" will
now install the Wave Device for Voice
Modem driver. Select "Specify the
location of the driver [Advanced]" and
click "Next" to install the wave device.
6. Select the "Search for the best driver for
your device.[Recommended]" option and
choose the "Removable Media ( Floppy,
CD-ROM...)" or "Specify a location"
and type the letter of your CD-ROM
drive (e.g. D:\ where D is the letter of
your CD-ROM drive). Then click
"Next" to continue.
www.netcomm.com.au
Page 4
Rev.3 - YML2003
Mega-i-Modem 56