Symbol PTC-2124 User Manual page 41

1. This connector allows the PTC to be connected quickly and easily to an SC-1124 Desktop Cradle, a VC-1124 Vehicle Cradle,
or a CP-1124 Connector Pod for communication and battery pack charging. The PCMCIA door must be closed completely
before any of these devices can be attached to the PTC. See Appendix E for this connector's pinouts.
2. Opening this flexible door provides access to the PCMCIA slot(s). When the door is closed, it seals the PTC from dust, dirt,
and moisture. The PCMCIA slots are connectors that allow you to attach a variety of credit-card-size accessories. These
include data cards, modems, local area network (LAN) adapters, and wireless communication cards. The PTC-2124's PCMCIA
slots accept two Type II or one Type III PCMCIA card. Type III cards must be inserted into Slot 1, the slot farthest from the
PTC's cradle connector.
3. A 15 VDC, 2.7 A AC or vehicle adapter connects to this jack and to an electrical outlet or a vehicle's cigarette lighter socket
or power source to recharge the PTC's battery pack.
PTC-2124 User's Guide
Figure 3. The PTC-2124 (back view)
1. Cradle connector
3. Power jack
2. PCMCIA door
Note:
Disposable screen protectors
Pin 1
If the PTC contains a factory-installed
LAN radio, only one PCMCIA slot,
which accepts Type II cards, is
available. Type III cards are not
supported if the PTC contains only one
PCMCIA slot.
29