Planet Networking & Communication WAP-1963 User Manual page 33

New Password
Re-Enter Password
Management IP
IP Address
Subnet Mask
DHCP Server
DHCP Server
Default Gateway IP
Domain Name Server IP
Start IP/End IP
Domain Name
Lease Time
Point. The default password for the Access Point is admin. Note that the
password is case-sensitive.
Enter the password (up to 15-digit alphanumeric string) you want to login to
the Access Point. Note that the password is case-sensitive.
Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
Designate the Access Point's IP Address. This IP Address should be unique
in your network. The default IP Address is 192.168.0.1.
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.
Enable or disable the DHCP Server.
Specify the gateway IP in your network. This IP address should be different
from the Management IP.
This is the ISP's DNS server IP address that they gave you; or you can
specify your own preferred DNS server IP address.
You can designate a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients. By default the IP range is from: Start
IP 192.168.0.100 to End IP 192.168.0.200.
You can specify the Domain Name for your Access Point.
The DHCP Server when enabled will temporarily give your LAN client an IP
address. In the Lease Time setting you can specify the time period that the
DHCP Server lends an IP address to your LAN clients. The DHCP Server
will change your LAN client's IP address when this time threshold period is
reached.
28