Technical Information; Factory Settings - Worcester GREENSOURCE 6 kW Installation Manual

Technical information

Factory settings

The table displays the factory values (F value) of the settings that you, as a customer,
(K) can change via the customer menus Menu and Advanced menu. The functions of
Installer/Service level (I/S) under Menu and Advanced menu in the table are accessed by
the installer after changing the access level.
Menu
Start up
--"--\Setting the clock
--"--\ --"--\Set date
--"--\ --"--\Set time
--"--\Connected extra sensors
--"--\ --"--\T5 acknowledged (T5)
--"--\Connection capacity (Electric element)
--"--\ --"--\State total output
--"--\ --"--\Compressor mode, output limitation
--"--\ --"--\Additional heat only, output limitation
--"--\Manual operation
--"--\Additional heat options
--"--\ --"--\Additional heat only?
--"--\ --"--\ Block additional heat?
--"--\Language
--"--\Correct sensor
--"--\Fan defrost interval
--"--\Fan defrost time
--"--\Forced defrost
--"--\Block crankcase heater at high outdoor
temperature
--"--\Anti-jamming mode time
--"--\Alarm buzzer signal length
--"--\T1 Set point value maximum
Menu
Level F value
--"--\Display
--"--\ --"--\Contrast
--"--\ --"--\Brightness
I/S
yy-mm-dd
I/S hh:mm:ss Room temperature setting (T5)
Temperature increase/decrease (ej T5)
I/S No
Temperature increase/decrease settings (ej T5)
--"--\Limit value for V or H
I/S 13,5 kW --"--\Much colder/warmer, change
I/S --"--\Colder/warmer, change
4,5/6,75 kW
I/S
9,0/13,5 kW
Extra hot water
I/S No
I/S No
I/S No
I/S Selected
I/S 0
I/S 1 time
I/S 1,0 min
I/S No
I/S 10,0ºC
I/S 02:00
I/S 1 min
I/S 80ºC
39
Technical information
Level F value
I/S 10
I/S 10
K 20,0ºC
K =
I/S 10ºC
I/S 8%
I/S 3%
K 0 h