Technical Information; Factory Settings - Worcester GREENSOURCE User Manual

Technical information

Factory settings

The table displays the factory values (F value) of the
settings that you, as a customer, (K) can change via the
customer menus Menu and Advanced menu.
Menu
Temperature increase/decrease
Room temperature setting
Extra hot water
Advanced menu
Temperature
Heating system temperature
----"----\Heat curve
----"----\Hysteresis
----"----\----"----\Maximum
----"----\----"----\Minimum
----"----\----"----\Time factor
Room sensor settings (T5)
----"----\Room temperature setting
----"----\Room sensor infl uence
----"----\----"----\Change factor
----"----\----"----\Blocking time
Time limited settings
----"----\Time control heating
----"----\----"----\Day and time
----"----\----"----\Change in temperature
----"----\Holiday
----"----\----"----\Date
----"----\----"----\Change in temperature
Heating season
----"----\Heating season limit
----"----\Delay
----"----\Direct start limit
Heating, maximum operating time at hot
water requirement
Read the table as follows:
Level F value
To fi nd the settings for Holiday go to the Advanced menu,
select Temperature, then select Time limited settings and
K =
(no change)
then Holiday.
K 20ºC
K 0 h
Advanced menu
Level F value
Hot water (T3)
Extra hot water
V=20,0ºC
----"----\Number of hours
K
H=55,2ºC
----"----\Stop temperature
Hot water peak
K 16ºC
----"----\ Interval
K 4ºC
----"----\Start time
K 10
Time control hot water
Setting the clock
K 20ºC
Set date
Set time
K 5
K 4 h
Alarm
Alarm log
----"----\Delete alarm log?
K Off
K
Access level
K -10ºC
K Off
Return to factor y settings
K
K -10ºC
Deactivate alarm buzzer
K 18ºC
Program version
K 4 h
K 10ºC
K 20 min
33
Technical information
Level
F value
K 0
K 65ºC
K 0 days
K 03:00
K Off
K
K
K No
K 0
K No
K No
K xx.xx.x