Table of Contents
Advertisement
MAKinG coFFEE
selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
peatedly until the required taste is displayed.
selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (fig. 11) until the message corresponding to the re-
quired quantity of coffee is displayed:
coffee selected
MY COFFEE
SHORT
STANDARD
LONG
EXTRA LONG
customising the "my coffee" quantity
The appliance is set by default to automatically deliver 30 ml
of "my coffee".
To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (fig. 12).
2. Press the
is displayed.
3. Press and hold the
sage "Program quantity 1 MY COFFEE" is displayed and
coffee delivery begins. Release the button
4. As soon as the coffee in the cup reaches the required level,
press the
button (fig. 15) again.
The quantity of coffee in the cup set has now been pro-
grammed.
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 13).
button (fig. 10) re-
Quantity in cup (ml)
Programmable:
from ≃20 to ≃180
≃40
≃60
≃90
≃120
button (fig. 10) until "MY COFFEE"
button (fig. 15) until the mes-
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
otherwise the coffee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coffee
For hotter coffee, you should:
•
perform a rinse cycle by selecting the " Rinsing" function in
the settings menu (page 10)
•
warm the cups by rinsing them with hot water (using the
hot water function);
•
increase the coffee temperature in the settings menu
(page 11);
•
Press the
symbol is displayed).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container with coffee beans (fig. 14).
2. Place under the coffee spouts:
- 1 cup, if you want 1 coffee (fig. 15);
- 2 cups if you want 2 coffees (fig. 17).
3. Lower the spout as near as possible to the cups (fig. 16).
This makes a creamier coffee .
4. Press the button corresponding to the number of coffees
required (1 cup
5. Preparation begins. The amount of coffee selected is dis-
played together with a progress bar which gradually fills
as preparation progresses.
Please note:
•
While the machine is making coffee, delivery can be in-
terrupted at any moment by pressing one of the delivery
buttons.
•
At the end of delivery, to increase the quantity of coffee in
the cup, just press and hold (within 3 seconds) one of the
12
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards "7".
For fuller bodied creamier coffee, turn
one click anticlockwise towards "1" (do
not turn more than one click at a time
button to enable the cup warmer (the
or 2 cups
).
Advertisement
Table of Contents
Troubleshooting
