Table of Contents
Advertisement
rinsing
Use this function to deliver hot water from the spout to heat the internal
circuit and make the coffee delivered hotter.
To enable the function, proceed as follows:
1. Press the MEnu/Esc button to enter the menu;
2. Press < or > (fig. 9) until "Rinsing" is displayed;
3. Press the
button. "Confirm?" is displayed;
4. Press the
button (fig. 3). Hot water flows out of
the spout, heating the internal circuit and making the cof-
fee delivered hotter.
Descaling
For instructions on descaling, see page 18.
install filter
For instructions on how to install the filter, see the section "Wa-
ter softener filter" (page 19).
replacing the filter (if installed)
For instructions on how to replace the filter, see the section
"Replacing the filter" (page 20).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MEnu/Esc button to enter the menu;
2. Press < or > (fig. 9) until "Adjust time" is displayed;
3. Press the
button (fig. 3). The hours flash on the
display;
4. Press < or > (fig. 8) to change the hour;
5. Press the
button to confirm. The minutes flash;
6. Press < or > (fig. 9) to change the minutes;
7. Press the
button to confirm.
The time is set: press the MENU/ESC button to exit the menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly.
To enable Auto-start, proceed as follows:
1. Press the MEnu/Esc button to enter the menu;
2. Press < or > (fig. 9) until "Auto-start" is displayed;
3. Press the
button. "Enable?" is displayed;
4. Press the
button to confirm;
5. Press < or > to choose the hour;
6. Press the
button to confirm;
7. Press < or > (fig. 9) to change the minutes;
8. Press the
button to confirm;
9. Press the MEnu/Esc button to exit the menu.
Once the time has been confirmed, activation of auto-start is
indicated by the symbol
To disable the function:
1. Select auto-start from the menu;
2. Press the
3. Press the
The
symbol is no longer displayed.
Auto-off
When this function is enabled:
-
the appliance is automatically turned off completely, re-
leasing the main switch. To turn the appliance on again,
press the main switch (A20) and then the ON/stand-by
button (A23).
When this function is disabled:
-
the appliance switches to stand-by; power remains on
and it consumes a minimal amount of electricity.
To turn the appliance on again, press the ON/stand-by
button (A23).
The stand-by time can be modified using "Auto-off timer" (if
"Auto-off" is enabled) or "Auto-standby timer " (if "Auto-off" is
disabled).
To enable or disable auto-off, proceed as follows:
1. Press the MEnu/Esc button to enter the menu;
2. Press < or > (fig. 9) until "Auto-standby timer" (or Auto-
off) is displayed;
3. Press the
played;
4. Press the
5. Press the MEnu/Esc button to exit the menu.
Auto-standby timer/ auto-off timer
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the MEnu/Esc button to enter the menu;
2. Press < or > (fig. 9) until "Auto-standby timer" (or "Auto-
off") is displayed;
3. Press the
4. Press < or > (fig. 9) until the number of minutes/hours
of operation is displayed (15 or 30 minutes, or 1, 2 or 3
hours);
5. Press the
6. Press the MEnu/Esc button to exit the menu.
Auto-off is programmed.
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
10
displayed alongside the time.
button. "Disable?" is displayed;
button to confirm.
button. "Enable?" or "Disable?" is dis-
button to confirm;
button;
button to confirm;
Advertisement
Table of Contents
Troubleshooting
