conTEnTs DELiVErinG hoT WATEr AnD sTEAM ........14 Delivering hot water ................15 TEchnicAL DATA............... 6 Changing the quantity of water delivered automatically.....15 Steam delivery ..................15 DisposAL ................. 6 Tips for using steam to froth milk ............15 inTroDucTion ..............7 Cleaning the spout after use ..............15 Symbols used in these instructions ............7 cLEAninG ...............15 Letters in brackets...................7...
• Make sure the socket used is freely accessible at all times, enabling the appliance to be unplugged when necessary. Thank you for choosing the ETAM36.365 automatic bean to cup • Unplug directly from the plug only. Never pull the power espresso and cappuccino machine. cable as you could damage it. We hope you enjoy using your new appliance.
B9. MiLK button: to deliver a cup of milk Please note: B10. LATTE MAcchiATo button: to deliver a macchiato Keep these instructions. If the appliance is passed to other per- B11. cAppuccino button: to deliver a cappuccino sons, they must also be provided with these instructions. B12.
connecting the appliance softener filter as described in the section “WATER SOFTEN- ER FILTER” (page 19). If your model is not provided with Important! a filter, you can request one from De’Longhi Customer Check that the mains power supply voltage corresponds to the Services.
rinsing 9. Press the MEnu/Esc button to exit the menu. Use this function to deliver hot water from the spout to heat the internal Once the time has been confirmed, activation of auto-start is circuit and make the coffee delivered hotter. indicated by the symbol displayed alongside the time.
To disable (or enable) energy saving, proceed as follows: 2. Press < or > (fig. 9) until “Beep” is displayed; 1. Press the MEnu/Esc button to enter the menu; 3. Press the button. “Disable?” is displayed (or “En- 2. Press < or > (fig. 9) until “Energy saving” is displayed; able?”...
MAKinG coFFEE Please note! The grinding adjustment dial must only be turned when the selecting the coffee taste coffee mill is in operation. The appliance is set by default to make coffee with a standard If the coffee is delivered too slowly or taste.
Filling and attaching the milk container coffee buttons ( 1. Remove the lid by pressing the release button C4 and at Once the coffee has been made, the appliance is ready to be the same time lifting the lid upwards (fig. 19); used again.
3. Press the button corresponding to the required drink. The programming the quantity of coffee and milk in the cup for the cAFFELATTE, cAppuccino, LATTE MAcchiATo name of the drink selected is displayed together with a and MiLK buttons progress bar which gradually fills as preparation progress- The appliance is set by default to automatically deliver stand- 4.
tity HOT WATER” is displayed, then release. the nozzle, pushing it upwards and turning it until it is at- 3. When the hot water in the cup reaches the required level, tached. press the button again. cLEAninG The machine is now reprogrammed with the new quantity. Important! steam delivery •...
Before the indicator protrudes from the cup tray, the drip tray 1. Make sure the machine is correctly turned off (see “Turn- must be emptied and cleaned, otherwise the water may over- ing off”, page 10). flow the edge and damage the appliance, the surface it rests on 2.
cleaning the hot water/steam nozzle Each time you prepare milk, clean the nozzle with a sponge to remove milk residues from the gaskets. DEscALinG Descale the machine when the message “DESCALE” and the symbol “ ” flashe on the display. 9.
“DESCALE, Please wait” is displayed. The descale pro- 3. Press the button to confirm the selection. gramme starts and the descaler liquid comes out of the 4. Press < or > repeatedly to set the level as measured by water spout. the indicator paper (see previous section).
removing the filter When you install the filter, you must notify the appliance If you want to use the appliance without the filter, you must of its presence. remove it and notify the appliance of its removal. 8. Press the MEnu/Esc Proceed as follows: button to enter the 1.
DispLAYED MEssAGEs DispLAYED MEssAGE possiBLE cAusE soLuTion FILL TANK Insufficient water in the tank. Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. EMPTY GROUNDS CONTAINER The grounds container (A18) is full. Empty the grounds container and drip tray, clean and replace (fig.
TrouBLEshooTinG Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact customer services. proBLEM possiBLE cAusE soLuTion The coffee is not hot. The cups were not preheated. • Enable the cup warmer, leave the cups at least 20 minutes to warm up. •...