PRESONUS StudioLive CS18AI Owner's Manual page 69

5 Controlling StudioLive RM-series Mixers with the CS18AI
5.7 System Menu
Setting Device Permissions
Footswitch changes the parameter assigned to the rear-panel footswitch jack. By
default the footswitch is set to Tap Tempo. You can also assign it to control the effects
mute, Record start/stop, or talkback or to drop a marker or load the selected scene.
Brightness toggles the screen brightness between full on and dim.
Sample Rate changes the StudioLive RM sample rate. You can set
the sample rate to 44.1, 48, 88.2, or 96 kHz. A higher sample rate will
increase the fidelity of the recording but will increase the file size and
the amount of system resources necessary to process the audio.
All DSP functions are available at 44.1 and 48 kHz. At 88.2 and 96 kHz,
the Fat Channel processing for all mix bus outputs will be disabled.
The CS18AI can set permissions to restrict access for other devices
connected to the mixer. To set permissions for a device:
1. Touch the Permissions icon. The Permissions page appears.
2. Touch the Device/User field and choose the user or device for which you
want to set permissions from the drop-down menu that appears.
3. Touch the Mix field and choose the desired access level
from the drop-down menu that appears.
Devices running QMix-AI can be set to None, All Auxes, or to any individual
aux (or linked stereo pair of auxes). For devices running UC Surface to control
the CS18AI, FOH is also available, providing full access to the mixer.
StudioLive CS18AI
™
Owner's Manual
65