PRESONUS StudioLive CS18AI Owner's Manual page 58

5 Controlling StudioLive RM-series Mixers with the CS18AI
5.5 Global Mixer Controls
Monitor
2. Press and hold the Mute Group 1 button. It will flash for one second, indicating
that it is storing the group. When the group has been stored, it will illuminate.
The StudioLive CS18AI features a headphone output and monitor outputs, giving
you the ability to monitor multiple sources. The Monitor bus on the CS18AI allows
you to monitor the main outputs, Solo bus, or a cue source that is selected from
the Main Mono/Center bus, digital return, stereo tape input, or any aux mix.
Note: The headphones and Monitor Output jacks carry the same monitor signal.
Phones adjusts the overall level for the Headphone output.
Monitor adjusts the overall level for the Monitor outputs.
Solo routes the Solo bus signal. This patches any soloed channel, subgroup, or
aux bus to the Monitor bus. This can be useful in a number of ways. For example:
• Auditioning an aux-send monitor mix
• Dialing in the dynamics processing and EQ on a subgroup
• Creating a better blend for instrumental sections (horns, strings, etc.)
Main routes the same signal that is being sent from the main
outputs to the Monitor bus. This signal is always pre-fader.
Cue routes the custom-assigned source to the Monitor bus. This source can be
selected in the Monitor Cue Routing screen by pressing the Monitor Edit button.
StudioLive CS18AI
™
Owner's Manual
54