Internal Effects - PRESONUS StudioLive CS18AI Owner's Manual

5 Controlling StudioLive RM-series Mixers with the CS18AI
5.3 Processing Signals with the Fat Channel
Stereo Linking
Mix Bus Assignments
Stereo linking is done within the Fat Channel. Input channels, aux
buses, and subgroups can be linked to create a stereo pair.
A stereo link can be enabled when either channel in the pair is selected.
When the Stereo Link button is illuminated, all dynamics settings
(except Polarity Invert), subgroup assignments, and main assignments
are destructively pasted to the other channel in the pair.
Output assignments are set within the Fat Channel. It should be noted that the
StudioLive RM prevents you from creating a feedback loop. Subgroups can only be
assigned to the main outs, and the aux buses cannot be assigned to a subgroup
or to the main outputs. Any channel on the input bus can be assigned to any or all
of the subgroup outputs, as well as to the main outputs. The internal effects bus
returns can also be assigned to any or all of the subgroups and to the main outputs.
LR assigns the selected channel or subgroup to the Main L/R mix bus.
Mono assigns the selected channel or subgroup to the Main Mono/Center mix bus.
Edit opens the subgroup assignment view on the touchscreen. Since StudioLive
RM mixers have flexible mix buses, you can turn any aux mix into a subgroup. Aux
mixes will show as grayed out in the subgroup assign screen. Subgroups will show as
"on. " Pressing a subgroup button will assign the selected channel to that subgroup.
StudioLive CS18AI
™
Owner's Manual
42