PRESONUS StudioLive CS18AI Owner's Manual page 31

4 Connecting the CS18AI to Your Audio System
4.2 Headphone and Monitor Outputs
Monitor Outputs
Selecting a Headphone/Monitor Source
The monitor outputs are balanced XLR-M jacks and are convenient for
control room monitoring when the CS18AI is used to control Studio One
or for monitoring in broadcast applications. The signal routed to these
outputs is the same as that appearing at the headphone outputs.
• To control the level appearing at the Monitor outputs, adjust the
Monitor knob in the Monitor area of the CS18AI's front panel.
The phones jack and monitor outputs on the CS18AI carry the same source.
To select a monitor source:
• Press the Solo button in the Monitor area to select the Solo bus as the source.
• Press the Main button in the Monitor area to select the main mix as the source.
• Press the Cue button in the Monitor area to select the cue source.
To set the cue source:
• Press the Edit button in the Monitor area. The Monitor Cue Routing page appears.
• Touch the source you want to monitor.
StudioLive CS18AI
™
Owner's Manual
27