User Program Mode - NAPCO F-64TPG Operating Manual

User Program Mode

Your Installer has programmed into your system a uniquely coded digital Master I-FOB that can be used to not only disarm the system and
silence the siren, but also allows access to the User Program Mode. User Program Mode allows you to program various options, such as
adding other User Codes, setting the system Time and Date, enrolling new I-FOB's, etc. The following explains how you can enter User
Program Mode and to program these additional options:
ACTIVATE PROGRAM
ENTER DATE (00/00/00)
ENTER TIME
U S E R P R O G R A M M O D E
Enter the User Program Mode
Y/N
1. Insert your Master I-FOB into the Touchpad. Press MENU to enter the Touchpad
Menu Mode, then remove the I-FOB from the Touchpad.
2. Press MENU until "ACTIVATE PROGRAM Y/N" is displayed, then press YES. "CHANGE
DATE" will display indicating that the system is ready to update the first option, the cur-
rent date. Press YES to change the date.
Enter Date
1. With "ENTER DATE (MM/DD/YY)" displayed in the LCD window, of the two digits repre-
senting the month, the cursor is located under the left digit. Press the YES or NO but-
tons to increment (or decrement) this left digit as needed. Press ENTER move the
cursor to the right.
2. To edit the date, press the YES or NO buttons to increment (or decrement) the digits as
needed. Press ENTER move the cursor to the right, then repeat this process for the
year. When finished, press MENU to save, and the next option, "CHANGE TIME" will
display. Press YES to change the time.
Enter Time
(00:00)
1. With "ENTER TIME (HH:MM)" displayed in the LCD window, of the two digits represent-
ing the hour, the cursor is located under the left digit. Press the YES or NO buttons to
increment (or decrement) the hour digits as needed. Press ENTER to move the cursor
21