Silencing An Alarm - NAPCO F-64TPG Operating Manual

If an alarm occurs while you are at home:
ALARM
RESET
If an alarm occurs while you are away:
ARMED
RESET
14
S I L E N C I N G A N AL AR M
The Touchpad siren will sound and the red
"ALARM". Proceed with caution! If you suspect that an intruder may still be in the premises, leave
immediately and call authorities from a neighbor's telephone.
To silence the alarm, insert your I-FOB key into the I-FOB slot on the face of the Touchpad and re-
move when alarm has silenced.
The LCD window will continue to display the names of the zone(s) on which the alarm occurred. De-
termine which zone caused the alarm and then press
When you unlock the deadbolt to enter, the Garage Touchpad sounder will activate and the red
light will be flashing to warn you that an alarm had occurred while you were away.
ARMED
Proceed with caution! If you suspect that an intruder may still be on the premises, leave
immediately and call authorities from a neighbor's phone.
To disarm the system, you must insert your I-FOB key into the I-FOB slot on the Touchpad. If the
system is not disarmed in 30 seconds, the alarm will sound.
The LCD window will continue to display the names of the zone(s) on which the alarm occurred. De-
termine which zone caused the alarm and then press
light will flash.
ARMED
to clear the alarm memory.
RESET
to clear the alarm memory.
RESET
The LCD display will read