Printer Management Using Netspot Device Installer; Printer Management Using Netspot Console; Additional Protocol Settings; Http - Canon LaserBase MF5770 Network Manual

Printer Management Using NetSpot Device Installer

NetSpot Device Installer is utility software for specifying the initial settings of Canon devices connected
to a network. Available on the CD-ROM, NetSpot Device Installer can be accessed directly without
installation, enabling network users to quickly and easily specify the initial settings of network devices.
For instructions on how to use NetSpot Device Installer, see the online help for NetSpot Device
Installer.

Printer Management Using NetSpot Console

NetSpot Console is utility software capable of managing devices connected to a network. This software
enables network users to set or view various types of information about network devices using a web
2
browser, such as list or map display of devices, detailed protocol settings, display and notification of
device status, and job manipulations.
For instructions on how to use NetSpot Console, see the online help for NetSpot Console.

Additional Protocol Settings

This section describes two additional protocols supported for this machine: HTTP (HyperText Transfer
Protocol) and SNMP (Simple Network Management Protocol).

HTTP

The HTTP allows you to communicate between your computer and the machine via a web interface
(i.e., Remote UI).
Before you use the Remote UI, follow the procedure below to activate HTTP on the machine from the
<NETWORK SETTINGS> menu.
1
Press [Menu].
2
Press [
3
Press [
4
Press [
5
Press [
6
Specify the HTTP port number (default: 80) using the numeric keys ➞ press [OK].
7
Press [Stop/Reset] to return to the standby display.

SNMP

The SNMP helps you monitor the state of the machine and collects its information. The following two
items can be set:
■ COMMUNITY NAME
Sets the SNMP community name. You can specify up to two community names.
■ SNMP WRITABLE
Allows the PCs on the network to access the machine and modify its settings if this item is activated. You can
specify this setting for each community separately.
2-12
(+)] to select <NETWORK SETTINGS> ➞ press [OK].
(-)] or [
(+)] to select <LAN SETTINGS> ➞ press [OK].
(-)] or [
(+)] to select <USE HTTP> ➞ press [OK].
(-)] or [
(+)] to select <ON> ➞ press [OK].
(-)] or [