Description Of The Blinking Graphic Symbols - Toshiba e-studio 450 Operator's Manual

1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS

The graphic symbol on the touch panel shows the status of the equipment. When one of the graphic
symbols blinks, take the appropriate action referring to the page shown.
1 : CHECK ORIGINALS symbol
Blinks when an original misfeed occurs inside the reversing automatic document feeder.
"1. Paper Misfeed in the Reversing Automatic Document Feeder (optional)"
2 : RELAY UNIT MISFEED symbol
Blinks when a paper misfeed occurs in the relay unit.
"9. Paper Misfeed in the Relay Unit (optional)"
3 : FUSER MISFEED symbol
Blinks when a paper misfeed occurs in the fuser unit.
"7. Paper Misfeed in the Fuser Unit"
4 : DUPLEXER MISFEED symbol
Blinks when a paper misfeed occurs inside the automatic duplexer.
"5. Paper Misfeed in the Automatic Duplexer"
5 : BYPASS MISFEED symbol
Blinks when a sheet of paper fails to be fed into the equipment during bypass copying.
"4. Paper Misfeed on the Bypass Feed Unit"
12
6 : DRAWER MISFEED symbol
Blinks when paper fed from one of the drawers is misfed.
"2. Paper Misfeed in the Drawer Feeding Area"
7 : OPTIONAL FEEDER MISFEED symbol
Blinks when paper fed from the large capacity feeder (optional) is misfed.
"3. Paper Misfeed in the Large Capacity Feeder (optional)"
8 : JAM RELEASING UNIT MISFEED symbol
Blinks when a misfeed occurs in the jam releasing unit.
"6. Paper Misfeed in the Jam Releasing Unit"
244
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
1 2
13
12
11
10 9
Page 260
Page 258
Page 257
Page 257
Page 255
Page 258
3
4
5
6
7
8
Page 253
Page 256