•
Working from the rear side of the
windshield and from the relevant
bulb, disconnect the connector
(4).
•
Remove the tail light bulb (5)
and replace it with another of the
same type.
LOW BEAM BULB
•
Working from the rear right side
of the windshield, remove the
connector (6).
•
Turn the bulb holder (7) anti-
clockwise and remove it.
•
Extract the bulb from its fitting.
CAUTION
INSERT THE BULB INTO THE BULB
HOLDER, MAKING SURE THE REFER-
ENCE FITTINGS MATCH.
•
Install a bulb of the same type
adequately.
HIGH BEAM BULB
108
•
Handel vanaf de achterkant van
het kapje en vanaf de kant van
het betreffende lampje om de
connector (4) los te koppelen.
•
Verwijder het positielampje (5)
en vervang het met één van het-
zelfde type.
LAMPJE VAN HET DIMLICHT
•
Door te handelen vanaf de rech-
ter kant achteraan het kapje,
verwijdert men de connector (6).
•
Draai de lamphouder (7) in te-
genwijzerszin, en verwijder
hem.
•
Verwijder het lampje uit de zit-
ting.
LET OP
PLAATS HET LAMPJE IN DE LAMP-
HOUDER,
DOOR
DE
SPECIALE
PLAATSINGSZITTEN TE DOEN OVER-
EENKOMEN.
•
Installeer op correcte wijze een
nieuw lampje van hetzelfde ty-
pe.
LAMPJE VAN HET GROOT LICHT