5.
To enter the SP mode, press together (5 seconds), release, then press [#Enter].
6.
Select SP5824.
SP5824
NVRAMUpload
7.
Push [#Enter].
8.
When the message prompts you to execute, push [#Enter].
<NVRAMUpload>
Processing
<NVRAMUpload>
result = OK
9.
Remove the SD card.
10.
Switch the machine off and on.
Replacing NVRAM
1.
Remove the controller cover ( x 2). (See 'Covers and Common Units – Rear Covers')
2.
Controller board faceplate [A] ( x 2).
3.
Controller board [B] ( x 4)
Boards
3
137