5. Service Tables
1.Service
Controller service settings.
2.Engine
Engine service settings.
3.End
Leave the SP mode and return to normal operation.
1.
With the item that you want to open displayed in the LCD, press[#Enter].
2.
Press or to display all the menus on the same level, then press [#Enter] to open the
submenus.
3.
Push [Escape] to the highest level, or push or to display "3.End" then press [#Enter].
Printer Controller Service Mode
5
Controller Service Mode Menus
The controller service mode menu (1.Service) is the first item on the menu.
Item
Bit Switch
Clear Setting
Print Summary
Display Version
Bit Switch Programming
1.
Enter the SP mode, select "1.Service", and press [#Enter] twice
SP1001-001
Bit Switch 1 Set
Press or to select the bit switch setting to change.
2.
SP1001-002
Bit Switch 2 Set
3.
Press [#Enter].
Sw#2 00000000
182
Adjusts the bit switch settings.
Initializes the settings for the "System" menu of the user mode.
Prints a summary of all the controller settings.
Displays the current version number of the controller firmware.
What It Does