Roland M-5000 Reference Manual page 81

MAIN
NONE
No MAIN at all is used.
MAIN 1: MONO
MAIN 2: None
MONO
* One audio path is used.
MAIN 1: LR
MAIN 2: None
LR
* Two audio paths are used.
MAIN 1: LR
MAIN 2: MONO
LR+M
* Three audio paths are used.
MAIN 1: LR
MAIN 2: LR
LR+LR
* Four audio paths are used.
MAIN 1: LCR
MAIN 2: None
LCR
* Three audio paths are used.
MAIN 1: CROSS-MATRIX LCR
MAIN 2: None
CROSS-MATRIX LCR
* Three audio paths are used.
MAIN 1: 5.1ch
MAIN 2: LR
5.1+LR
* Eight audio paths are used.
Creates an output bus where MAIN 1 is
downmixed to stereo.
STEREO DOWNMIX
* Two audio paths are used.
What's STEREO DOWNMIX?
This creates a "DMIX" output bus on which a MAIN 1, set to 5.1ch or
LCR, is downmixed to stereo.
The "DMIX" output bus is displayed in the Output Patchbay.
Processing such as EQ or Dynamics is not performed; nor is level
adjustment or the like.
You make the settings for downmixing 5.1ch or LCR to stereo
(coefficient settings) in the DOWNMIX SETTINGS window.
* Creating "DMIX" output buses use up two audio paths.
What's CROSS-MATRIX LCR?
When MAIN is set to CROSS-MATRIX LCR, the feeds sent to MAIN LR
or MAIN C are subject to exclusive control.
When sending to MAIN LR is on, feed to MAIN C is automatically
turned off.
When sending to MAIN C is on, feed to MAIN LR is automatically
turned off.
Changing the Number of Input Channels/Output Buses
SUBGROUP
NUMBER NAME
Value input area
NUMBER
SUBGROUP number
SUBGROUP name
* When no specific name exists, a name
NAME
corresponding to the SUBGROUP number
(GRP xx) is automatically assigned.
Turning this on makes the SUBGROUP stereo.
STEREO
* Two audio paths are used.
Enter the number of SUBGROUPs you want to
Value input area
add.
Increases the quantity of SUBGROUPs by the
ADD
number entered in the value input area.
Memo
You can select multiple channels for moving or deleting.
0"Selecting and Moving Multiple List Items" (p. 67)
0"Selecting and Deleting Multiple List Items" (p. 68)
81