Roland M-5000 Reference Manual page 179

DCA/BUS tab
The further tabs are displayed on the DCA/BUS tab.
5 DCA
5 MAIN
5 SUBGROUP
5 AUX
5 MTX INPUT
5 MTX
5 MIX-MINUS
5 MUTE GRP
Channel number/Channel name
Channel number Channel number
Channel name
Channel name
Tapping this turns all parameters on the row on/
off.
You set the following parameters on/off for each column.
Parameters set to "off" are excluded from scene recall.
Sets Channel Safe on/off
Output buses/DCA GROUPs/MUTE GROUPs for
SAFE
which Channel Safe is turned on are all excluded
from scene recall.
NAME Outbut bus/DCA GROUP name
PATCH Output patchbay
BUS TRIM Digital gain
Φ Polarity
D.GAIN
Digital gain
FILTER HPF, LPF
DYN 1 Dynamics 1
DYN 2 Dynamics 2
EQ
4-band EQ
DELAY
Delay
INSERT A Channel insert
INSERT B Channel insert
SENDS Sends to AUX
ROUTE Sends on/off to MAIN/SUBGROUP/MIX-MINUS
PAN
Pan settings
MUTE Muting
FADER Sends to MAIN
ASSIGN Assignments to DCA/MUTE GROUP
Tapping the header areas of the respective columns turns the entire
column on or off.
FX/GEQ/INS tab
The further tabs are displayed on the FX/GEQ/INS tab.
5 FX
5 GEQ
5 INSERT
Channel number/Channel name
Channel number Channel number
Channel name
Channel name
Tapping this turns all parameters on the row on/
off.
You set the following parameters on/off for each column.
Parameters set to "off" are excluded from scene recall.
Sets Channel Safe on/off
SAFE
FX/GEQ/INSERT for which Channel Safe is turned
on are all excluded from scene recall.
NAME INSERT name
PATCH
Patchbay
PARAMETER Parameters of FX/GEQ/INSERT
Tapping the header areas of the respective columns turns the entire
column on or off.
OTHER tab
CHANNEL LINK
Channel link setting
SETTING
Scene Memory
179