Roland M-5000 Reference Manual page 109

PAN Tab (LCR/CROSS-MATRIX LCR)
MAIN LR Sends the signal to MAIN LR.
MAIN C Sends the signal to MAIN C.
MAIN LCR Sends the singal to MAIN LCR.
Specifies how signals are sent to MAIN LR and
LCR PAN
MAIN C.
PAN Sends pan to MAIN LR or MAIN LCR
Sets the ratio of the signal sent to MAIN C when
PAN is set to C (center).
CENTER
* This is displayed when LCR PAN is on.
Sets the width of the stereo image.
You can maintain the stereo-image width set here
while working with PAN.
WIDTH -100% - 100%
* This is displayed when the input channel/
output bus being manipulated is set to
STEREO.
LCR PAN
When this is on, the signals sent to MAIN LCR can be collectively
turned on/off. Pan will operate across the MAIN LCR and CENTER is
displayed.
When this is off, the signals sent to MAIN LR and MAIN C can be
individually turned on/off.
CENTER
This sets the amount of the signal sent to MAIN C within a range of
0 to 100 when PAN is set to C (center).
When set to 0, no signal is sent to MAIN C.
When set to 100, setting PAN to C causes the signal to be sent only
to MAIN C.
* This is displayed when LCR PAN is on.
Center 0
L C R
PAN
CROSS-MATRIX LCR
When MAIN is set to CROSS-MATRIX LCR, the feeds sent to MAIN LR
or MAIN C are subject to exclusive control.
When sending to MAIN LR is on, feed to MAIN C is automatically
turned off.
When sending to MAIN C is on, feed to MAIN LR is automatically
turned off.
CH EDIT Window
Center 50 Center 100
L C R L C
PAN PAN
R
109