Vulcan-Hart C24EO3 Service Manual page 17

C24EO SERIES ELECTRIC COUNTERTOP STEAMERS - SERVICE PROCEDURES AND ADJUSTMENTS
NOTE: Use temperature scale on control dial plate for
reference only. The scale represents dial turns in 1°F
increments, not the actual temperature. When
calibrating, use the recorded temperature taken from
thermocouple.
ELEVATION (FT)
Sea Level
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000 or above
A. If the set point temperature of the control is
correct, no adjustment is necessary.
B. If the set point temperature of the control is
not correct, adjust the temperature control.
1) Turn the temperature control dial
clockwise to increase temperature or
counterclockwise to decrease
temperature.
NOTE: During temperature control adjustment,
display will blink on/off. When display reverts to a
steady image, that displayed temperature set point
has been "locked in" to memory.
Fig. 37
TEMPERATURE (°F)
210
208
206
204
202
200
198
196
195
194
Page 17 of 27 F25386 (0415)