Removing The Label Cartridge; Selecting A Label Cartridge - Dymo XTL 300 User Manual

To insert the label cartridge
Press the label compartment release and
1
lift the cover. See Figure 6.
Make sure the tape and ribbon are taut
2
across the mouth of the label cartridge
and that the tape passes between the
label guides. See Figure 5.
To tighten the ribbon, turn the ribbon
rewind spool in the direction indicated by
the arrow on the cartridge.
Insert the label cartridge and press firmly
3
until the cartridge 'clicks' into place. See
Figure 6.
Close the label compartment cover.
4

Removing the Label Cartridge

You can continue to design labels without a label cartridge inserted. Just
remember to insert a compatible label cartridge before attempting to print. See
Using the Label Applications on page 13.
To remove the label cartridge
Press the label compartment release and lift the cover. See Figure 6.
1
Remove the label cartridge.
2
You can now create labels using any of the label applications. You will be asked to
select a label cartridge to use when you start a new label.

Selecting a Label Cartridge

You can design any type of label when the label compartment is empty. Each time
you select a label application, you will be asked to select the label cartridge to use
for your new label design.
To choose a label cartridge
Remove the label cartridge from the label maker.
1
You are warned that the label compartment is empty.
Select a label application from the Home screen.
2
You are asked to select a label cartridge.
The labels available for you to choose from will be filtered to show only those
label cartridges appropriate for the label type you selected.
Do one of the following:
3
• Enter the part number of the label cartridge you wish to use.
• Scroll through the list of labels and select a specific label.
• Select Wizard. You will be asked to select the label properties you wish to
use.
®
4 XTL 300
User Guide
Press
and lift
Figure 6