By using the QR code to download to your mobile device. Registering Your Label Maker Visit www.dymo.com/register to register your label maker online. During the registration process, you will need the serial number, which is located inside the label compartment cover.
Make sure you have all the items shown in Figure 1. Kit model includes two label cartridges Figure 1 Package Contents 1 XTL 300 label maker 4 USB cable 7 Software download card Rechargeable lithium AC power adapter Quick Start Guide...
Your label maker uses DYMO XTL label cartridges, available in a variety of widths and materials including continuous tape and pre-sized labels. Visit www.dymo.com for information about purchasing label cartridges. Press the button on the top of the label Press...
Charging the Battery The label maker is powered by a rechargeable, lithium polymer (LiPo) battery. The battery, included with your label maker, is already installed and is shipped partially charged. A power adapter is included with your label maker for recharging the battery. Fully charging the battery will take approximately 2.5 hours.
Remove the paper backing from the label to expose the adhesive and place the label on a clean, dry surface. Continuous labels Pre-sized labels Refer to the User Guide available at support.dymo.com for complete details on using your label maker.
Getting to Know Your Label Maker Become familiar with the features shown. 1 On/Off Save 17 Caps lock 2 Home 10 Numeric/Symbol keys 18 Navigation 3 Print/Print options 11 Backspace/Delete 19 Back 4 Cutter 12 Return 20 New label/Clear 5 LCD display 13 Rotate/Align 21 OK 6 Function keys...
Home Screen The following figure shows the major features available from the Home screen. Current label Battery status cartridge Label applications Continue editing Change the the current label settings Open a saved label A number of label applications are available for your specific labeling job: Quick Cable wrap Patch panel...
Automatically fill panel labels, or automatically create a series of single labels. Serialize View a series of labels, one at a time. Locate label errors. Go to Refer to the User Guide available at support.dymo.com for complete details on using your label maker.
Using the Label Maker with Your Computer Your label maker can be used as a standalone label maker or you can print ™ labels directly from your computer using the latest version of DYMO ID software. ™ Downloading and Installing DYMO ID...
Page 11
Using DYMO ID Software Your label maker can be used as a standalone label maker or you can print labels ™ directly from your computer using the latest version of DYMO ID software. ™ Using DYMO ID software is the recommended method for producing a high volume of labels.
Danger of explosion if a battery is incorrectly handled, charged, disposed or replaced. Replace only with the same or equivalent type recommended by DYMO. When charging the battery, use only the power adapter provided and follow the instructions in this guide.
Page 13
To reduce the risks associated with fire and explosion, which if not avoided, could result in serious injury or death and/or property damage: Stop charging the battery if charging is not completed within the specified time. Never leave the battery unattended during charging.
Page 14
6 This warranty does not affect your statutory rights as a consumer. Special Provisions for Australia The following provisions shall apply in addition to the above warranty if the sale of the DYMO product occurred in Australia: ...