Inserting International Characters; Creating A Vertical Label - Dymo XTL 300 User Manual

Refer to Symbols on page 49 for the complete list of symbols available.
To insert a symbol
From the edit screen, select
1
Select the desired symbol and press
2
The symbol is inserted.
Symbols can also be inserted from the Symbols tool as described in Inserting
Punctuation above.

Inserting International Characters

The label maker supports the extended Latin character set. Similar to using a
mobile phone, holding down a letter key will display all the variations of that letter.
The order in which the variations appear depends on the language you have
selected. For example, if French is selected as the language and you hold down
the letter a, you will see à á â ã ä å and so on through all the variations available.
To insert a character
Press and hold an alphanumeric key.
1
The Diacritical tool appears and the
selected character is added to the label at the cursor position.
Use  or  to select the desired character.
2
The character is inserted and the Diacritical tool disappears after a few
seconds.

Creating a Vertical Label

You can create a vertical label with the text in a horizontal or vertical orientation.
The instructions in this section are for a general label type.
To create a vertical label
From the Home screen, select
1
Select Portrait as the label orientation.
2
Select the label length.
3
Add your text and formatting.
4
Press and select
5
vertical orientation.
®
26 XTL 300
User Guide
and then select Symbol.
.
.
to change the text to a
Vertical text on a
portrait label