Cable Wrap Label; Heat-Shrink Tube Label - Dymo XTL 300 User Manual

Laminated cable wrap labels can only be printed using pre-sized Laminated Wire/
Cable Wrap label cartridges.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
Laminated cable wrap label properties are based on the label cartridge selected
and cannot be changed.
To create a self-laminating label
From the Home screen, select
1
Add text and formatting.
2

Cable Wrap Label

The cable wrap label is one of several cable management specific labels. The
content of the cable wrap label is repeated three times so that it can be viewed
from any angle when the label is wrapped around the cable.
One text object is automatically added to the label. Barcodes and images cannot
be added to a cable wrap label.
Text size and style apply to all labels in the file.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
Cable wrap labels can be printed on any type of continuous labels.
The label properties you can set are:
Cable type and Cable type: CAT 5/6, COAX, AWG: 4/0 - 2/0, AWG: 0 - 2, AWG: 3 - 5,
diameter
AWG: 6+, or Custom
Diameter - Available when Custom is selected for Cable type.
Minimum: 5/32" (4 mm)
Maximum: 2" (50.8 mm)
To create a cable wrap label
From the Home screen, select
1
Do one of the following:
2
• Select the cable type.
• Select Custom and then select the cable diameter.
Add text and formatting.
3

Heat-Shrink Tube Label

The heat-shrink tube label is one of several cable management specific labels.
Heat shrink tube labels can be printed on any continuous or pre-sized Heat-Shrink
Tube labels.
One text object is automatically added to the label. You can add an image and a
barcode object to heat-shrink tube labels.
Text size and style apply to all labels in the file.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
®
17 XTL 300
User Guide
.
.