Engine Oil; Transmission Gear Oil; Rear Differential Gear Oil - Subaru April BRZ Service Manual

2012
Table of Contents

Advertisement

PRE-DELIVERY INSPECTION
12.BRAKE FLUID
Check the brake fluid amount. If the amount is in-
sufficient, carry out a brake line test to identify
brake fluid leaks and check the brake operation. Af-
ter that, refill the brake fluid tank with the specified
type of fluid.
CAUTION:
If the brake fluid is spilt over exhaust pipe, wipe
it off with cloth to avoid emitting smoke or
causing a fire.
(A) MAX. level
(B) MIN. level

13.ENGINE OIL

1) Park the vehicle on a level surface.
2) Remove the oil level gauge and wipe away the
oil.
3) Reinsert the oil level gauge all the way. Be sure
that the oil level gauge is correctly inserted and
properly orientated.
4) Pull out the oil level gauge again, and check the
oil level. If the engine oil level is below "L" mark,
add oil to bring the level up to "F" mark.
5) Start the engine, and spread the oil in engine.
Pre-delivery Inspection
6) After turning off the engine, wait five minutes or
more for the oil to return to the oil pan before check-
ing the oil level.
NOTE:
To prevent overfilling of engine oil, do not add oil
above "F" mark when the engine is cold.
(A)
(B)
PI-00791

14.TRANSMISSION GEAR OIL

Check for leakage of the transmission gear oil.
CAUTION:
If gear oil is spilt over the exhaust pipe, wipe it
off with a cloth to avoid emitting smoke or
causing a fire.

15.REAR DIFFERENTIAL GEAR OIL

Check for leakage of gear oil from the rear differen-
tial.
CAUTION:
If the rear differential gear oil is spilt over ex-
haust pipe, wipe it off with cloth to avoid emit-
ting smoke or causing a fire.
PI-8
(B)
(A)
(D)
(F)
(E)
(A) Oil level gauge
(B) Oil filter
(C) Oil filler cap
(D) "F" mark
(E) "L" mark
(F) Approx. 1 L (1.1 US qt, 0.9 Imp qt)
(C)
PI-00812

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents