Engine Coolant Inspection; Engine Coolant Replacement - Subaru April BRZ Service Manual

2012
Table of Contents

Advertisement

PERIODIC MAINTENANCE SERVICES
11.Engine Coolant
A: INSPECTION
1) Park the vehicle on a level surface.
2) Check that the reservoir tank fluid level is between the FULL and LOW lines when the engine is cool.
CAUTION:
• Do not substitute water for the coolant fluid.
• Refer to the "RM" section for the coolant to be used.
NOTE:
If the coolant level is low, check for leakage and add coolant until it reaches the FULL line.
(A) FULL
(B) LOW
3) Remove the radiator cap and check that the coolant is filled up to the radiator filler neck.
B: REPLACEMENT
CAUTION:
Do not remove the radiator cap sub-assembly while the engine and radiator are hot in order to pre-
vent possible burns. There is a possibility of fluid or steam surging out due to pressurization.
1) Lift up the vehicle.
Engine Coolant
(B)
PM-58
(A)
PM-00679

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents