Lever Stroke - Subaru April BRZ Service Manual

PERIODIC MAINTENANCE SERVICES

2. LEVER STROKE

1) Adjust the parking shoe clearance before adjusting lever stroke.
2) Release the claws, and then remove the boot - parking brake.
3) Pull the lever assembly - hand brake hard 3 to 5 times.
4) Turn the adjusting nut until the lever stroke is at the specified value.
Lever stroke:
7 to 8 notches when pulled with a force of 200 N (20.4 kgf, 45 lbf)
5) Check there is no brake drag.
6) Check that the brake warning light illuminates when the lever assembly - hand brake is operated.
NOTE:
The light must illuminate when the first notch is reached after pulling the lever.
7) Install the boot - parking brake.
Parking Brake
PM-86
PM-00666
PM-00667