Table of Contents
Advertisement
PRE-DELIVERY INSPECTION
10.FRONT HOOD LOCK RELEASE
Operate the front hood release lever to check that
the front hood is unlocked normally.
Operate the lever (A) and check that the front hood
is opened normally.
11.BATTERY
Check the battery terminals to make sure that there
are no rust or corrosions due to fluid leaks. Check
that the battery caps are securely tightened.
(B)
(C)
(A) Cap
(B) Upper level
(C) Lower level
Pre-delivery Inspection
12.BRAKE FLUID
Check the brake fluid amount. If the amount is in-
sufficient, carry out a brake line test to identify
brake fluid leaks and check the brake operation. Af-
ter that, refill the brake fluid tank with the specified
type of fluid.
CAUTION:
If the brake fluid is spilt over exhaust pipe, wipe
it off with cloth to avoid emitting smoke or
causing a fire.
PI-00780
(A)
13.ENGINE OIL
PI-00760
1) Park the vehicle on a level surface.
2) Remove the oil level gauge and wipe away the
oil.
3) Reinsert the oil level gauge all the way. Be sure
that the oil level gauge is correctly inserted and
properly orientated.
4) Pull out the oil level gauge again, and check both
(A)
sides of the oil level gauge. Use a lower side to de-
termine the engine oil level. If the engine oil level is
below "L" mark, add oil to bring the level up to "F"
mark.
5) Start the engine, and spread the oil in engine.
PI-00012
PI-8
(A) MAX. level
(B) MIN. level
(A)
(B)
PI-00791
Advertisement
Table of Contents
