JLG 1250AJP Troubleshooting Manual page 303

STEP 2: CALIBRATING THE PLATFORM LEVEL
SENSORS
1. Position the Platform/Ground select switch to the
Ground position.
2. Plug the analyzer into the connector inside the
Ground control box.
3. Pull out the Emergency Stop switch and start the
engine.
4. Manually level the platform with the switch on the
Main Terminal Box.
3128411
5. The analyzer screen should read:
6. Use the arrow button to reach ACCESS LEVEL 2. Hit
Enter.
7. Enter the Access Code, 33271.
8. Use the arrow button to reach CALIBRATIONS menu
and hit ENTER.
9. Use right arrow go to PLAT. LEVELING screen.
1250AJP
SECTION 5 - CALIBRATIONS
5-303