Installation And Commissioning; Installation - Pfaff 8390 Instruction Manual

8

Installation and commissioning

8

Installation

.01
Suitable connections for electricity and compressed air must be available at the machine's
location (see Chapter 3 Specifi cations).
Fig. 8 - 01
● Unscrew screw 1 and swivel brake unit 2 upwards.
● Loosen the four hexagon socket screws and remove cover 3.
● Unscrew the nuts 4 and remove together with clip 5 and two washers 6.
● Swivel drive mechanism 7 upwards and secure.
● Loosen the fi ve hexagon socket screws and remove cover 8 to make the lifting eye
accessible.
● Lift the machine from the transport pallet and position on the track bed.
● Swivel drive mechanism 7 downwards and fasten with the washers 6, clip 5 and the
nuts 4. The nuts 4 should stand approximately 1 cm under the upper edge of the
threaded bolts.
● Mount brake unit 2 with screws 1.
● Mount covers 3 and 8.
The machine must only be mounted and commissioned by qualifi ed personnel!
All relevant safety regulations are to be observed!
8
1
1
6
2
Installation and commissioning
7
3
4
5
21