Adjusting The Hot Wedge On The Pfaff 8390-010; Positioning The Hot Wedge Crosswise To The Feed Direction - Pfaff 8390 Instruction Manual

13

Adjusting the hot wedge on the PFAFF 8390-010

.06
13

Positioning the hot wedge crosswise to the feed direction

.06.01
Requirement
In the feed direction the hot wedge 3 should be centred to the feed rollers.
3
Fig. 13 - 04
● Switch on the machine and set the sealing temperature at its minimum value.
● Call up the input menu.
● Position the heating element.
● Adjust screw 1 (screws 2) in accordance with the requirement.
● Switch off the machine.
Let the heating element cool down!
Danger of burns if the heating element is touched!
Adjustment
1
2
2
3
89