Table of Contents
Advertisement
Display
ERROR: 331
#Prog. No.. #Zone No.
ERROR: 332
#Prog. No.. #Zone No.
ERROR: 340 # Zone No.
ERROR: 341 # Zone No.
ERROR: 342 # Zone No.
ERROR: 343 # Zone No.
ERROR: 344
# Program No.
PROGRAM XX
NOT IN MEMORY
ERROR: 401
ERROR: 402
ERROR: 501
ERROR: 502
13
Temperature control error
.12.02
Error number
Discription
0
No error
1
Thermoelement 1 disconnection (HW-alarm-bit)
2
Control circuit not reacting
3
Temperature window (alarm) exceeded
4
No temperature increase despite of controller full scale (heating
cartridge defective or thermo element slipped from holder)
Description
Programmed roller pressure > roller pressure li-
mit
Speed and differential outside permissible values
Selected temperature too high
Air volume does not match nozzle type
Programmed sealing off not plausible
Programmed output (OUT) not plausible
Program not for this machine, nozzle/wedge
Program XX does not exist
Text fi le cannot be opened
Error in read text fi le
Error when opening fi le "pikto.hex" or "vorlagen.
hex" disconnect error
No ACK from control panel Disconnect error
Adjustment
103
Advertisement
Table of Contents
