Programmed Heat Sealing With Sequences - Pfaff 8390 Instruction Manual

Heat sealing
10

Programmed heat sealing with sequences

.06
In the headline, in addition to the sequence number of the selected sequence, the number
of zones, the current zone and the comment for the current program are displayed. For the
current zone all heat-sealing parameters are displayed. The heat-sealing parameters have
been stipulated during programming and cannot be processed without changing the pro-
gram. In addition, in the case of heat sealing with sequence programs, the individual pro-
grams belonging to the sequence are displayed, and the current program is shown here as
an inverse symbol.
● Select the desired sequence, see Chapter 9.02 Selecting the production type.
Example 1
Description of the functions
Program selection
The function opens the menu for entering the program number or for choosing the
production type, see Chapter 9.02 Selecting the production type.
Notepad
This function opens the notepad with program details about the heat-sealing tools
to be used.
Heat sealing program
Press this function to select the appropriate heat sealing program.
Start
(This function appears, when the top feed roller is lowered.)
This function is used to call up the sealing start, analog to pedal function "+2", also see
Chapter 7.04 Pedal.
Feed roller up/down
This function is use to raise or lower the top feed roller, depending on its position, analog to
the pedal functions "-1" and "+1", also, see Chapter 7.04 Pedal
Feed rollers in reverse
This function can be used to call up the reverse running function of the feed rollers.
Carriage menu
With this function the carriage menu is called up so that the machine can be moved on the
track bed, see Chapter 10.08 Carriage menu.
Input menu
This function is used to call up the "Input" mode, see Chapter 11 Input.
59