Pfaff 8390 Instruction Manual page 50

Heat sealing
● Increase or reduce the start delay for the feed rollers directly.
or
● Call up the fi gure panel to enter the start delay.
__
Enter the start delay depending on the material being processed.
● Conclude the input, permissible values will be taken over
Further functions are available for creating programs:
● Select the sealing tool by switching between heating wedge and hot air nozzle. This
● Select the nozzle type in accordance with the width of the nozzle installed, see Chapter
or
● Select the hot wedge type in accordance with the width of the hot wedge installed, see
50
The start delay function is used to stipulate the amount of time which should
pass between the engaging of the heating element and the start of the feed
rollers.
makes it possible e.g. to also create programs for hot air machines on hot wedge machi-
nes.
9.03.05 Stipulating the nozzle type and hot air volume ...
Chapter 9.03.03 Stipulating the hot wedge type ...