Creating/Editing A Heat Sealing Program - Pfaff 8390 Instruction Manual

10

Creating/editing a heat sealing program

.03
Up to 100 sealing programs (0 – 99) each with up to 20 sealing zones can be fi led and mana-
ged in the machine memory.
● Call up the input menu.
● With the "programming" function from the input menu it is possible to enter the pro-
gramming function for sealing programs. A number block for entering the desired pro-
gram number appears.
If no program is fi led in the memory under the program number selected, the current
sealing parameter of the manual heat sealing function will be taken over and a new program
created.
As an alternative to the creation of a new program, the program number of an existing pro-
gram (e.g. 10) can be selected, and this program can be changed or copied to create a new
program. In the case of existing programs, the number of zones and possibly a comment are
displayed next to the program number in the headline.
● Enter the program number, e.g. "10".
● Confi rm selection.
The fi rst zone of the selected program is displayed on the screen with functions for ente-
ring sealing parameters, notes, switching to the next zone, as well as basic functions for the
program input. For further descriptions of the functions see Chapter 10.03.07 Example for
sealing program input.
Creating a new program
Example 1
Heat sealing
Altering a program
Example 1
43