Hood Surfaces - GE JV247 Series Owner's Manual And Installation Instructions

Replaceable charcoal filter
NOTE: DO NOT rinse, or put charcoal
filters in an automatic dishwasher.
Charcoal Filter--Recirculating Installations Only
The charcoal filter cannot be cleaned.
It must be replaced. Order filter no.
WBO2XI0700. Replacement f ilters can be
orderedfrom your GEsupplier.
tf the hood isnot ventedto the outside,the
air will be recirculated througha disposable
charcoalfilter that helpsremovesmokeand
odors.
Thecharcoal f ilter shouldbe replaced after 6
to 12months(depending on hood usage).
Toremove:
Pulldownon the centerof the front edge
of the filter.Thefilter willthen slipout ofthe
retainingtabs on the back.
Toreplace:
Slipthe back edgeof thefilter intothe
retainingtabs and pushthe front edgeup
until it snapsinto place.
Stainless Steel Surfaces (on some models)
Donot usea steel-woolpad; it will scratch
the surface.
Tocleanthe stainless steelsurface, u se
warm sudsywater or a stainless steelcleaner
or polish. A lwayswipe the surfacein the
directionof the grain.Follow the cleaner
instructionsfor cleaningthe stainless steel
surface.
Toinquireabout purchasing stainless steel
appliancecleaneror polish,or to find the
locationof a dealernearestyou,pleasecall
our toll-freenumber:
National Parts C enter 800.626.2002
GEApplianceParts.com
Painted Surfaces Ion some models)
Donot usesteel-woolpads or other
abrasivecleaners.Theywill scratch the
surface.
Cleangrease-laden surfacesof the hood
frequently. T ocleanthe hood surface,use
a hot, dampclothwith a milddetergent
suitablefor paintedsurfaces. A boutone
tablespoon of ammoniamay be addedto
the water.Usea clean,hot, dampcloth to
removesoap.Drywith a dry,cleancloth.
NOTE:When cleaning, t ake carenot to
comein contact with filtersand othernon-
enameledsurfaces.
A CAUtiON: whencleaning t he
hoodsurfaces, be certainthatyou donot
touchthelightbulb with moisthandsor
cloth.A warm or hot lightbulbmay breakif
touched with a moistsurface. A lwayslet the
lightbulbcoolcompletely beforecleaning
aroundiL
ht
cover Hood Light
When using an energy saving bulb in your GE hood
make sure you use either:
GE Long Life Energy Smart'" Spiral ® T2
Product Code: 85383
Description: FLE!3HT2/2/SW/CD
or
GELongLifeEnergySnarl"A!7
ProductCode:47486
Description: F LE! ! /2/A! 7×L/CD
Availableat www.gelighting.com
A CAUtiON:
L etthe light bulb
coolcompletelybeforeremoving.A warm or
hot bulb may breakif touchedwith a moist
cloth or hand.
Remove the bulband replaceit with a type
A15incandescent l ight bulbwith an ordinary
screwbase, n ot more than 60 Watts,or a
type A!7 or T2CompactFluorescent ( CFL)
light bulbwith an ordinaryscrewbase,
not more than 13Watts.NOTE: U seonly
incandescent b ulbsin modelsRN328, JN327
and JV338.
INPORTANT: Forinstallation, h andlingand
disposalprecautions, r eferto the fluorescent
bulb packagingliterature.
Toremove the light cover
(onsomemodels):
• Press thesideswith two fingersuntil the
sideprongsare released.
• Liftthe lightcover and slideit towardyou
in one motion.
Toreplacethe light coven
• Insertthe pronglocatedat the end of the
coverintothe top opening.
Gentlypushthe coverup and pressthe
sidesto fit the sideprongsintothe side
openings.
Release andthecoverwilllockin position.